J
Joe G \(Home\)
- Jan 1, 1970
- 0
What would you suggest to measure conducted EMC
via DC power cables of a product... rather than mains
currents using a LISN and spec an.
Say 0 to 48V SELV.
Product is a 125KHz Magnetic Feild gen which is 12V powered.
Is conducted EMC requirements only for mains requiements?
Regards
Joseph
via DC power cables of a product... rather than mains
currents using a LISN and spec an.
Say 0 to 48V SELV.
Product is a 125KHz Magnetic Feild gen which is 12V powered.
Is conducted EMC requirements only for mains requiements?
Regards
Joseph