Connect with us

Electronics Project: Dice

Discussion in 'General Electronics Discussion' started by Cam Nelson, Feb 21, 2016.

Scroll to continue with content
  1. Cam Nelson

    Cam Nelson

    1
    0
    Feb 21, 2016
    I'm making a dice for a school project, but I am struggling with the creation of the PCB. Below is a diagram of the circuit, the circuit works fully, I am just unsure on the PCB, thanks in advance. upload_2016-2-21_19-7-29.png
     
  2. dorke

    dorke

    2,342
    665
    Jun 20, 2015
    Welcome to EP,

    Before you get to the PCB.
    Your project is faulty by design!

    Connecting LEDs in parallel is wrong.
    Each LED should have it's own different series resistor or (depending on the LEDs you use and "Power Supply voltage") connect them in series.
     
  3. 73's de Edd

    73's de Edd

    3,138
    1,320
    Aug 21, 2015

    .
    Sir Cam Nelson . . . . .



    Not to worry . . . at least you got 0o and its companion D4 LED correct ! . . . . . . and that would be your correct example,
    for all of the others . . . . . which are now in a Russian Roulette state.


    73's de Edd
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-