joe becraft
- Oct 26, 2015
- 2
- Joined
- Oct 26, 2015
- Messages
- 2
question... I have a pickup truck, I am wanting to wire up work lights on the back bumper, tying them in to the reverse lights as well as the cargo light... i know if I run a wire connecting the new work light/reverse lights to the cargo light, they will all come on together, the thing is, when the cargo light comes on, so does the dome light inside the cab...
my question is, can I put a diode inline between the cargo light and the dome light so basically when the dome light is on the cargo light is, but if the cargo light is on, the dome light isn't... do I need resistors or anything else, or will just a diode work?
thanks!
Joe
my question is, can I put a diode inline between the cargo light and the dome light so basically when the dome light is on the cargo light is, but if the cargo light is on, the dome light isn't... do I need resistors or anything else, or will just a diode work?
thanks!
Joe