Connect with us

Denon AVR 3600 receiver with no sound

Discussion in 'Troubleshooting and Repair' started by mthomas, May 29, 2011.

  1. mthomas

    mthomas

    2
    0
    May 29, 2011
    I let a friend use this receiver and he stated the speaker wires touched each other and now there is no sound. Is this an expensive repair and does anyone know if there may be a fuse inside that maybe needs replaced/ Thanks in advance for any help.
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,192
    2,694
    Jan 21, 2010
    If you are lucky, the overload caused a fuse to blow.

    If you are less lucky, the output transistors blew in order to protect the fuse.

    The former is cheap and easy, the latter possibly neither.

    Look for an internal fuse, and keep your fingers crossed.
     
  3. mthomas

    mthomas

    2
    0
    May 29, 2011
    Thanks for the info. I pulled the case off and there were several fuses however they all appear to be good. Sounds like it might not be worth fixing......
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-