Connect with us

CAMA-AFM31 USB Capacitive Fingerprint Module with FPC1020 pin configuration

Discussion in 'Datasheets, Manuals and Component Identification' started by akash1996, Apr 19, 2017.

  1. akash1996

    akash1996

    1
    0
    Apr 19, 2017
    I have a CAMA-AFM31 USB Capacitive Fingerprint Module with FPC1020. I am new to it and i cannot figure out what its pin configuration is. I have searched everywhere but am unable not find its datasheet. I just need to figure out its power, ground and tx/rx pins.
    Please can someone provide me with some help? I have attached the necessary pictures of the module.
    Thanks in advance.
    IMG_20170409_181110_1@1x.jpg FPC1020-fingerprint-sensor.png
     
  2. hevans1944

    hevans1944 Hop - AC8NS

    4,214
    1,994
    Jun 21, 2012
    The control board is different from the one you show, but you might be able to use the information provided at this website. Or maybe you could call one of the support telephone numbers that can be found here. Note this is an OEM product, so some software is required for your specific application.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-