Connect with us

anyone help? ngspice sensitivity analysis problem

Discussion in 'General Electronics Discussion' started by ishto, Mar 21, 2009.

Scroll to continue with content
  1. ishto

    ishto

    2
    0
    Mar 21, 2009
    i'm a newbie and used ngspice to do a sensitivity analysis
    the circuit is right
    but when i type the "sens v(?)" command
    there are not any output
    however other analysis is ok
    how to display the output of "sens", please? thanx!
     
  2. ishto

    ishto

    2
    0
    Mar 21, 2009
    the output is like this:
    ngspice 124 -> sens v(3)
    Doing analysis at TEMP = 27.000000 and TNOM = 27.000000



    No. of Data Rows : 1

    ngspice 125 ->
    thx 4 ur help!
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-