Maker Pro
Maker Pro

Any TV experts here?

B

~BD~

Jan 1, 1970
0
Any TV experts here?

I'll post my question if there are!

This TV: Sony Bravia KDL 32EX503U
 
B

bill

Jan 1, 1970
0
Any TV experts here?

I'll post my question if there are!

This TV: Sony Bravia KDL 32EX503U

I got quite good on repairing Philco 16 inch, black,and white, TVs back
in 1950s

Bill K7NOM
 
A

amdx

Jan 1, 1970
0
I got quite good on repairing Philco 16 inch, black,and white, TVs back
in 1950s

Bill K7NOM

Nowadays, aren't most TV's a computer driven monitor.
Mikek :)
 
W

William Sommerwerck

Jan 1, 1970
0
It was working fine, then didn't work? This suggests a possible change in
reception conditions. You should definitely swap the sets, as suggested.

However...

You've lost SD reception (SD being 625-line PAL), but not HD, right? As far
as I know, SD and HD use separate tuners. (I think.) I could be that the SD
tuner has gone out.
 
P

Phil Allison

Jan 1, 1970
0
"William Sommerwanker"
You've lost SD reception (SD being 625-line PAL), but not HD, right? As
far
as I know, SD and HD use separate tuners. (I think.) I could be that the
SD
tuner has gone out.


** The RF stages do not change with SD and HD.



..... Phil
 
W

William Sommerwerck

Jan 1, 1970
0
You've lost SD reception (SD being 625-line PAL), but not HD,
** The RF stages do not change with SD and HD.

Do you mean just the front end, or the IF section, too?

Given his description, it's hard to believe it was caused only by a change
in signal level.

We'll have a better when he swaps the sets.
 
P

Phil Allison

Jan 1, 1970
0
"William Sommerwaker "
Do you mean just the front end, or the IF section, too?

Given his description, it's hard to believe it was caused only by a change
in signal level.


** Wot a fuckwit.
 
Top