N
N Cook
- Jan 1, 1970
- 0
Can anyone improve on the following especially reducing, even further, the
chance of mistakingly using a meter set for current monitoring on live kit ,
thinking you are measuring voltage.
Assuming others here are like me, rarely use the current function of a
DVM/DMM.
Leave a gummy bright or contrasting sticker over the ammeter socket of the
meter. When transfering the red lead to that socket then transfer the label
to the function or on/off switch.
The ideal would be some sort of mechanical interlock but I cannot see how.
chance of mistakingly using a meter set for current monitoring on live kit ,
thinking you are measuring voltage.
Assuming others here are like me, rarely use the current function of a
DVM/DMM.
Leave a gummy bright or contrasting sticker over the ammeter socket of the
meter. When transfering the red lead to that socket then transfer the label
to the function or on/off switch.
The ideal would be some sort of mechanical interlock but I cannot see how.