D
Daveb
- Jan 1, 1970
- 0
Hi,
Does anyone have any experience/thoughts on the robustness of a 3.3v
CMOS Opamp configured as a differential amp with the inputs connected
via 10m cables to a strain gauge bridge in an electrically noisy
environment ? If I add clamp diodes from the opamp inputs to the rails
is there any difference between a 3.3v device and a 12v device in
terms of susceptability to damage from external transients, etc ?
Thanks
Dave
Does anyone have any experience/thoughts on the robustness of a 3.3v
CMOS Opamp configured as a differential amp with the inputs connected
via 10m cables to a strain gauge bridge in an electrically noisy
environment ? If I add clamp diodes from the opamp inputs to the rails
is there any difference between a 3.3v device and a 12v device in
terms of susceptability to damage from external transients, etc ?
Thanks
Dave