hello everyone : )
i have an old PSU for a HP printer that can output approx 18v @1.1amps
(which i believe is 19.8 watt)
My circuit however needs aprox 10v @1.5amps ( 15 watt)
I have two 10v regulators that offer 10v @ 1amp
So I wonder, can I use these 2 x regulators together in parallel with my PSU to provide my circuit with enough current?
thanks for any help. : )
i have an old PSU for a HP printer that can output approx 18v @1.1amps
(which i believe is 19.8 watt)
My circuit however needs aprox 10v @1.5amps ( 15 watt)
I have two 10v regulators that offer 10v @ 1amp
So I wonder, can I use these 2 x regulators together in parallel with my PSU to provide my circuit with enough current?
thanks for any help. : )