Maker Pro
Login Join Maker Pro
Or sign in with

Menu

Connect With Us

Network

Search results

  1. A

    programming the custom esp32 board

    I have made a custom esp32 board. For schematic, i have used sparkfun link-https://www.sparkfun.com/products/15006 The problem is- the arduino code is not uploading on the custom esp32 board. So, how i can upload the code on esp32? Is arduino bootloader is required first for bootloading the...
  2. A

    Fault in MIC29302UW(MIC29302UW is not giving correct output)

    The problem was in led. The led was defective. I kept led at output. I changed the led and kept all the connection as i have mentioned in my question and now its working. The issue was due to minimum load condition. Thanks for your help and support
  3. A

    Fault in MIC29302UW(MIC29302UW is not giving correct output)

    "If the chip fails to regulate even with proper load current, it is very likely defect." ---Do you mean i got the defective IC?
  4. A

    Fault in MIC29302UW(MIC29302UW is not giving correct output)

    I am using MIC29302UW IC for converting 12V to 3.8V. I am using this IC from last 2 years and have used this LDO in more than 50 devices. But the same IC is not working in my new PCB board. I even made a small PCB, only for testing the working of MIC29302UW,but its not showing the correct...
Top