Connect with us

programming the custom esp32 board

Discussion in 'Microcontrollers, Programming and IoT' started by AMAN KUMAR, Dec 31, 2020.

Scroll to continue with content
  1. AMAN KUMAR

    AMAN KUMAR

    4
    0
    Dec 16, 2020
    I have made a custom esp32 board. For schematic, i have used sparkfun link-https://www.sparkfun.com/products/15006
    The problem is- the arduino code is not uploading on the custom esp32 board. So, how i can upload the code on esp32?
    Is arduino bootloader is required first for bootloading the blank esp32? If yes, then what is the procedure for uploading the arduino bootloader on esp32?
     

    Attached Files:

  2. Harald Kapp

    Harald Kapp Moderator Moderator

    10,833
    2,442
    Nov 17, 2011
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-