Maker Pro
Login Join Maker Pro
Or sign in with

Menu

Connect With Us

Network

Recent content by Surf Rider

  1. S

    Unknown component, SOT-23 package?

    Hey Tim, I've been using a site to figure out smd components recently which has proved quite useful. http://www.s-manuals.com/smd I've got some SOT-23 zener diode in my circuit where all 3 terminals are landed but only pin 1 and 3 actually connected in the package. Hope this helps, if you...
  2. S

    SMD Identification!!!!

    Hi Chaps, I require a little help identifying some components on my circuit board. The first two have manufacture codes on them but I have had no luck at all finding any information out using them. The "V3F P119L" is in series with the circuit and then to a regulator after this. The second...
  3. S

    Crystal Identification!!!!

    Hi Dave, Yes 4 terminal terminate on the board. There is continuity between each pair that is in line so presume they are just one connection pad. The two in the centre are both connected together which goes to common/earth/ground. Cheers
  4. S

    Crystal Identification!!!!

    Thanks for the reply's. I'm sure it has 3 after testing the connections and looking at the data sheets for the products. I think it may be a 10Mhz with the 100 stamped on the top but I dont know how to physically test it to check. Cheers
  5. S

    Crystal Identification!!!!

    Hi there Chaps, I wondered if anyone could help me identify this component, I have had a search around which took ages and think it may be a MURATA piezoelectric ceramic resonator. Not totally sure about this identification if anyone could confirm this, and also not sure the markings if...
See more
Top