Graeme Kelly
- Mar 22, 2018
- 14
- Joined
- Mar 22, 2018
- Messages
- 14
Hello i have designed a boost converter that works on matlab but i am trying to simulate on multisim before i build it but i can seem to get this working i am looking for some assistance . the boost converter is meant to be boosting 3.75 V to 12.8 V to charge a battery
my parameters are
Duty cycle = 73 %
Switching frequency = 200000
Inductor= 0.8 x10-4
capacitor= 370x10-6
mosfet irf520n
Any help would be appreciated
my parameters are
Duty cycle = 73 %
Switching frequency = 200000
Inductor= 0.8 x10-4
capacitor= 370x10-6
mosfet irf520n
Any help would be appreciated