Maker Pro
Maker Pro

Which program created this schematic?

D

Dr. Anton Squeegee

Jan 1, 1970
0
Hello everyone,
Does anyone know which program can create a schematic
like this one:

http://www.uoguelph.ca/~antoon/circ/2qflash.htm

As far as drawing the schematic, just about any EDA package
designed to draw schematics will work just fine: OrCAD, Eagle, Protel,
God only knows how many others.

As far as turning said circuit into a PC board (why bother for
such a simple one?), or simulating it in SPICE, that's a whole 'nother
can of worms.

Happy hunting.

--
Dr. Anton Squeegee, Director, Dutch Surrealist Plumbing Institute
(Known to some as Bruce Lane, KC7GR)
kyrrin a/t bluefeathertech d-o=t c&o&m
Motorola Radio Programming & Service Available -
http://www.bluefeathertech.com/rf.html
"Quando Omni Flunkus Moritati" (Red Green)
 
M

Mike Rocket J. Squirrel Elliott

Jan 1, 1970
0
Abbie said:
Hello everyone,
Does anyone know which program can create a schematic
like this one:

http://www.uoguelph.ca/~antoon/circ/2qflash.htm

<rant ON>

I don't know what program drew that schematic. But I do yearn for the
look of a schematic cranked out by a draftsman. Take a look at a good
1960's schematic, like from a Tektronics scope service manual. It's a
work of art. Today's CAD-generated schematics have a clunky appearance
in comparison. IMHO.

<rant OFF>
 
C

CP

Jan 1, 1970
0
search radio amateur --> addr possible on call book cd rom :

http://www.arrl.org/

va3avr --> ontario

contact name : Tony van Roon ...

after ...

best Pierre



"Mike Rocket J. Squirrel Elliott"
 
T

Terry Pinnell

Jan 1, 1970
0
Abbie said:
Hello everyone,
Does anyone know which program can create a schematic
like this one:

http://www.uoguelph.ca/~antoon/circ/2qflash.htm

I asked the author. Here's his reply:
=================================
Hi Terry:

People keep asking me that same question on an almost weekly basis...
:)

I use none of them. And believe me I tried dozens of the past 8
years. None of them gave the results I was looking for so I decided
the heck with them all. I use Paint Shop Pro. I made a template
with all necessary electronic symbols and icons and copy-and-paste
whatever I need, then connect the lines, add color, etc. Results are
fantastic. PCB's are also done with Paint Shop Pro.

Cheers,

-Tony van Roon
Guelph, Ontario, Canada
=================================
 
B

Bob Stephens

Jan 1, 1970
0
I asked the author. Here's his reply:
=================================
Hi Terry:

People keep asking me that same question on an almost weekly basis...
:)

I use none of them. And believe me I tried dozens of the past 8
years. None of them gave the results I was looking for so I decided
the heck with them all. I use Paint Shop Pro. I made a template
with all necessary electronic symbols and icons and copy-and-paste
whatever I need, then connect the lines, add color, etc. Results are
fantastic. PCB's are also done with Paint Shop Pro.

Cheers,

-Tony van Roon
Guelph, Ontario, Canada
=================================

Whew

Talk about doing it the hard way.
Do you tape up the boards by hand also?
 
C

Chaos Master

Jan 1, 1970
0
Terry Pinnell([email protected]) slammed into the keyboard with
a 100-lbs hammer:

I use none of them. And believe me I tried dozens of the past 8
years. None of them gave the results I was looking for so I decided
the heck with them all. I use Paint Shop Pro. I made a template
with all necessary electronic symbols and icons and copy-and-paste
whatever I need, then connect the lines, add color, etc. Results are
fantastic. PCB's are also done with Paint Shop Pro.

I've used AutoSketch (a "light" version of AutoCad) from AutoDesk. It had basic
symbols for electronics - and a template for 'Electrical/Electronic Schematics',
which adjusted the grid, the toolbar and the symbol library, for schematics.
It worked well, until I changed to EAGLE.
 
A

Abbie

Jan 1, 1970
0
Chaos Master said:
Terry Pinnell([email protected]) slammed into the keyboard with
a 100-lbs hammer:



I've used AutoSketch (a "light" version of AutoCad) from AutoDesk. It had basic
symbols for electronics - and a template for 'Electrical/Electronic Schematics',
which adjusted the grid, the toolbar and the symbol library, for schematics.
It worked well, until I changed to EAGLE.

is it free?
 
C

Chaos Master

Jan 1, 1970
0
Abbie([email protected]) slammed into the keyboard with a 100-lbs
hammer:
is it free?

No, but I bought it as part of a "software collection" - there's a company here
in Brazil which sells legal software at low prices. For a free schematic editor,
look for gEDA. It's for Linux but can be compiled under Windows.
 
Top