What do you want to talk about today?
The refrigerator would only dispense crushed ice not uncrushed ice.
I disassembled the panels and removed the panel holding a solenoid and
associated hardware. The roll pin that holds the solenoid plunger had
shifted and released the assembly from the plunger, so the plunger would
pull in but the assembly would not move. I inserted the plunger
and drove the roll pin back into position. I wrapped Kapton tape around
the assembly to keep the pin from sliding again. I had to do this same
repair about 8 years ago.
Oh, the first time was 8 years ago, never mind.
Mikek