Maker Pro
Maker Pro

What component is this?

Jfekete

Aug 16, 2016
4
Joined
Aug 16, 2016
Messages
4
Hello, I would like to ask for help to find out what component (NSP0212) is on the attached picture.

Thanks,
Jfekete
 

Attachments

  • component.jpg
    component.jpg
    155.9 KB · Views: 181

Jfekete

Aug 16, 2016
4
Joined
Aug 16, 2016
Messages
4
Thanks!
It is in a sauna controller, there are tree on the PCB, and one of them had burned out.
It is in series connection with the infra heater tube, so it should be PTC, but the resistance is appx 0,04 - 0,06 Ohm. (I cannot exactly measure so low resistance.)
 

Minder

Apr 24, 2015
3,478
Joined
Apr 24, 2015
Messages
3,478
What is the PTC designation, sometimes that offers a clue.
M.
 
Last edited by a moderator:

Jfekete

Aug 16, 2016
4
Joined
Aug 16, 2016
Messages
4
Yes, it must be a protection circuit. Probably it limits the inrush current of the infra tubes. Probably NTC, but I’m not sure. And if it is NTC, what type (Ohm, Amps, e.t.c.).
 

arnold.hartog

Jul 26, 2020
1
Joined
Jul 26, 2020
Messages
1
did you find out an solution ? i have also an sauna with the same part which also is broken. part cannot be find online, so i need to know what alternative part can be bought. already thnx
 
Top