Maker Pro
Maker Pro

Warning Label Graphic Design

bobfami

Dec 30, 2009
1
Joined
Dec 30, 2009
Messages
1
I am designing a warning label as below. I don't like the graphic picture. I'm also not sure what the third item in the picture is. I am looking for an ANSI standard. Should the graphic be the standard shock hand? Is backfeed an electrical hazard?
under41_backfeed_2.jpg

shock.jpg

I'm an artist, not an electrical person, please help. Thanks in advance.
 

Resqueline

Jul 31, 2009
2,848
Joined
Jul 31, 2009
Messages
2,848
The graphics are not well laid out nor too self-explanatory and the third item is non-intelligible.
Backfeed is a hazard if one is not aware of it's presence, in that one then can turn off the main breaker into the facilities believing the system is safe to work on - whereas it still has power due to local generation.
 
Top