Maker Pro
Maker Pro

Uploading.........

rishabh

Mar 31, 2015
9
Joined
Mar 31, 2015
Messages
9
hi guys i am using Arduino Mega2560 . And basically when I am uploading a program blink then it is showing uploading...... which lasts for a long time but the result is same.
upload_2016-11-15_9-9-45.png

and also in error stage it is showing
Build options changed, rebuilding all

Sketch uses 1,518 bytes (0%) of program storage space. Maximum is 253,952 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 8,183 bytes for local variables. Maximum is 8,192 bytes.
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_getsync(): timeout communicating with programmer

see if some one could help it would always be appreciated.Thank you in Advance.
 

Wakoli Chokeli

Nov 16, 2016
6
Joined
Nov 16, 2016
Messages
6
..and press reset just before doing the upload. Confirm device driver too,may be a reinstall will help.
 
Top