Maker Pro
Maker Pro

TV power Fault.

baceyeb

Aug 27, 2016
9
Joined
Aug 27, 2016
Messages
9
Please I a working on a Grundig and Amstrad TV both 20" the fault is the same when you put it on the standby light comes on but it doesn't switch on, you can here the switching sound. I have change the FET transistors and the power ic's of both but still not switching the model for the Grundig is T55-830text made in Austria. The Amstrad is model 20"TX Silver made in Turchia pleas kindly help.
Also Mr. Adams thank you
 

shrtrnd

Jan 15, 2010
3,876
Joined
Jan 15, 2010
Messages
3,876
if you supply us with the Model Number of the sets, someone here might be able to find a schematic and
try to give you some advice about what to check. The model number is usually listed on the identification
plate on the back of the television set.
 

baceyeb

Aug 27, 2016
9
Joined
Aug 27, 2016
Messages
9
if you supply us with the Model Number of the sets, someone here might be able to find a schematic and
try to give you some advice about what to check. The model number is usually listed on the identification
plate on the back of the television set.
Thanks I have put it there.
 
Top