Maker Pro
Maker Pro

Through Hole Radio Module

BenG

May 3, 2017
4
Joined
May 3, 2017
Messages
4
Bit of a stab in the dark but..

I'm after a through hole radio module. That can communicate via a digital protocol (RS232, I2C, SPI etc...).
Through my day job I'm familiar with the Radiocrafts RC232 family but they don't offer through hole variants.

I want through-hole variant as a surface mount component is beyond my amateur soldering skills.

The short version of my project is that I want a remote control that can control one (or more) visible digital clocks. I.e. Remote control sends out start and stop commands and sync commands.
 
Top