Maker Pro
Maker Pro

SWADW-410KIT wireless security camera

Turtle

Aug 16, 2014
16
Joined
Aug 16, 2014
Messages
16
I recently purchased this ADW-410 - Digital Wireless Security System Monitor and Camera Kit on eBay. When powered on the red LED on the Front of the camera lights up, but the receiver does not seem to pick up the signal. The Swann Security camera does not have much information online about the internal components. What would be the best way to find out what is wrong. I have taken a look at the antenna already as it seems to be soldered on there fine. Which components would be worth checking and or replace. Any info on where I should start would be Helpful.
 

Attachments

  • IMG_7473.JPG
    IMG_7473.JPG
    203.2 KB · Views: 106
  • IMG_7475.JPG
    IMG_7475.JPG
    249.1 KB · Views: 98
  • IMG_7476.JPG
    IMG_7476.JPG
    162.8 KB · Views: 104
  • IMG_7478.JPG
    IMG_7478.JPG
    223.3 KB · Views: 125
  • IMG_7481.JPG
    IMG_7481.JPG
    179 KB · Views: 111
  • IMG_7483.JPG
    IMG_7483.JPG
    180.3 KB · Views: 114
  • IMG_7484.JPG
    IMG_7484.JPG
    106.2 KB · Views: 111
Top