SMD component identification

[Edward]

Can somebody help me to identify a SMD component? It's etched in it's
surface the number 100 and when I measure with a mulitimeter at the
diode scale it conducts in both sides.

Other smd component that I have is etched LT741.

Thanks in advance,

 

[Wolfgang Mahringer]

Hi Edward,

Can somebody help me to identify a SMD component? It's etched in it's
surface the number 100 and when I measure with a mulitimeter at the
diode scale it conducts in both sides.

Could it be a 10 ohm resistor?

HTH
Wolfgang

 

[Matt]

Maybe the "LT741" is a 741 Op Amp made by Linear Technology Corporation
?

 

[Edward]

Hallo!!!!!!!

When i measure it shows me 24 Ohms. So, i believe it isn't a
resistor. What do you think?

 

[William P.N. Smith]

Hallo!!!!!!!
Hi.

When i measure it shows me 24 Ohms. So, i believe it isn't a
resistor. What do you think?

Why do you think it's not a resistor, if it's resistive and not
polarity sensitive? Could it be a 100-ohm resistor in parallel with
some other stuff in the circuit?

You need to give us a bit more information, like size, number of
terminals, any other markings, where it is in the circuit, etc.

Is the 741 just a red herring?