Simetrix - EMI filter modeling

Discussion in 'General Electronics Discussion' started by Andrea1089, Sep 13, 2017.

  1. Andrea1089

    Andrea1089

    Joined:
    Sep 13, 2017
    Messages:
    8
    Likes Received:
    0
    How can I create a Simetrix model of a EMI filter?
    In particular, I wonder how to import a common mode choke into the schematic.
    Alternatively I'm considering to import a S-parameter model of the EMI filter, but I don't know how.
    Thank you for your replies.
     
    Andrea1089, Sep 13, 2017
    #1
    1. Advertisements

  2. Andrea1089

    Harald Kapp Moderator Moderator

    Joined:
    Nov 17, 2011
    Messages:
    8,287
    Likes Received:
    1,560
    Location:
    Germany-Europe-Earth-Sol System-Milky Way-Laniakea
    The common mode choke can be modeled by a coupled inductor. Observe the winding start of both inductors so the differential mode components cancel and common mode components are blocked.

    This is from the online help. I have no experience with Simetrix.
     
    Harald Kapp, Sep 13, 2017
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.