resoldering thermistor lead

[george stringe]

I have a thermistor that I would like to resolder the lead onto the
chip material.
Of course there needs to be a coating that will accept solder and also
make connection with the chip. Is this something that can be done
outside of the manufacturing process?

Thermistors are cheap but this one is difficult to duplicate and is in
a crystal oven so the resultant temp is kind of important.

thanks,

 

[Sam Goldwasser]

I have a thermistor that I would like to resolder the lead onto the
chip material.
Of course there needs to be a coating that will accept solder and also
make connection with the chip. Is this something that can be done
outside of the manufacturing process?

Thermistors are cheap but this one is difficult to duplicate and is in
a crystal oven so the resultant temp is kind of important.

How about silver Epoxy?

--- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header is ignored.
To contact me, please use the feedback form on the S.E.R FAQ Web sites.