Maker Pro
Maker Pro

Replacement A Board needed.

Twisted4465

Dec 27, 2017
4
Joined
Dec 27, 2017
Messages
4
Can someone point me in the direction were I can purchase a functional a main board . Board is Panasonic TNPH0831 3 A.

I had a couple blown capacitors on power supply board I replaced. And all other boards look fine.

Currently receiving 10 blink
Model number tc-p65s2
 

Attachments

  • 1515108766681928295794.jpg
    1515108766681928295794.jpg
    402.3 KB · Views: 126
  • 15151088322701810025134.jpg
    15151088322701810025134.jpg
    428.3 KB · Views: 114
  • 15151090380281977443917.jpg
    15151090380281977443917.jpg
    178.1 KB · Views: 108

73's de Edd

Aug 21, 2015
3,613
Joined
Aug 21, 2015
Messages
3,613
With it all put back together will it even come on and play for a bit
10 blinks is typically related to a power supply problem or OVERHEATING
Are there 5 fans at the top of the back of the set ?
? ? ? ?
 

Twisted4465

Dec 27, 2017
4
Joined
Dec 27, 2017
Messages
4
With all components together and plugged in. You click the remote on our hear two click and then you receive the 10 blink code.
Also there is no fan on this unit which I find weird.
 

73's de Edd

Aug 21, 2015
3,613
Joined
Aug 21, 2015
Messages
3,613
Sir Twisted4465 . . . . .

Also there is no fan on this unit which I find weird. . . . . .

FANS are being plural . . . . . as in fans A . . .B . . .C . . . and D.
PLUS that thing is a PLASMA and those mothas run HOTTTTT . . . . owning one of those is like having Mamma Cass's clothes iron plugged in , when you run it.
My neighbors Puny Sonic unit had one fan with a squeaky bearing and that one fans cooling deficiency was shooting him down after about 10 min of run time .
BUT . . . with your relay pull in and drop out sounds like there is STILL problems on the power supply board, rather than the one that you are presently vexated upon.

LOOK . . . MON . . . .up at the top all spaced apart in a row . . . .its gots fans !

upload_2018-1-5_20-54-20.png

73's de Edd
 
Last edited:

Twisted4465

Dec 27, 2017
4
Joined
Dec 27, 2017
Messages
4
Thank you for the assistance. I received this from a family friend and he took it to a repair shop and told him the scanner board was bad. But I'm guessing he was just trying to keep the tv to resell for cheap and stole the fans to keep the unit from tuning on. I can confirm after I opened the back of the unit there was no fans at the tops. Like you said they run hot. so I was confused after seeing that. I will just repurpose the tv components.
Thanks for the help
 
Top