Maker Pro
Maker Pro

relay circuit help

avguy

Apr 5, 2009
1
Joined
Apr 5, 2009
Messages
1
I have a relay circuit that I apparently do not understand the current flow through. Whether switch is open or closed, the same light stays lit. At the same time, you can see through the simulation that the relay is operating. Here are the images of the open and closed switch circuits. I would appreciate any input.
 

Attachments

  • sw closed.gif
    sw closed.gif
    9.1 KB · Views: 782
  • sw open.gif
    sw open.gif
    9.1 KB · Views: 643
Top