Maker Pro
Maker Pro

PSU 8 pin Din pinout for Videonics MX-Pro video mixer

patmyhill

Sep 27, 2018
2
Joined
Sep 27, 2018
Messages
2
Can any one help me with the pinout for an 8 pin Din plug outputting from the PSU for a Videonics MX-PRO video mixer, specifically the 5V DC 5amp output. Apart from over $300 for the PSU from Sothern Advantage (who don't respond to email questions) the dedicated PSUs seem to be like gold fillings in hens teeth!

Any help gratefully appreciated
 

shrtrnd

Jan 15, 2010
3,876
Joined
Jan 15, 2010
Messages
3,876
Did you try Googleing the make and model of your unit to see if there are any free schematics that you can download for your mixer?
I suppose an Operator's Manual wouldn't give you this information, but if you can find any information from a Service Manual or electrical schematic, that would help.
 

patmyhill

Sep 27, 2018
2
Joined
Sep 27, 2018
Messages
2
Thanks for the advice. Google delivers not much. The only service manual available is only some pages and not a circuit diagram
 
Top