Maker Pro
Maker Pro

Plug on Weller WTCP 50 soldering station?

taka8604

Nov 18, 2015
4
Joined
Nov 18, 2015
Messages
4

Attachments

  • 20151119_165225.jpg
    20151119_165225.jpg
    89.7 KB · Views: 108
  • 20151119_165231.jpg
    20151119_165231.jpg
    100.4 KB · Views: 108
  • 20151119_165239.jpg
    20151119_165239.jpg
    95.8 KB · Views: 113
  • 20151119_165246.jpg
    20151119_165246.jpg
    90 KB · Views: 109

midsomerdave

May 21, 2013
36
Joined
May 21, 2013
Messages
36
The connector in your pics isn't the same as the one on the picture of the Weller.
 

Ryan.davis21

Nov 28, 2017
3
Joined
Nov 28, 2017
Messages
3
What is the wiring for each pin? I had mine ripped out a while back and haven't been able to find the diagram. I have a 3 pin plug.. just not sure what color goes where..
 

midsomerdave

May 21, 2013
36
Joined
May 21, 2013
Messages
36
What is the wiring for each pin? I had mine ripped out a while back and haven't been able to find the diagram. I have a 3 pin plug.. just not sure what color goes where..
Do you mean the 'locking' DIN type or the Bulgin one Ryan?
 

midsomerdave

May 21, 2013
36
Joined
May 21, 2013
Messages
36
Ok, on 3 pin locking plugs, as you look into the socket on the machine itself the earth (green?) wire goes to the right hand pin. This is assuming its laid out with the largest space between the pins at the bottom. The two other wires don't matter....either way round will work.
 
Top