Maker Pro
Maker Pro

Pic genie Micro controller Problems

Milz2000

Mar 25, 2017
1
Joined
Mar 25, 2017
Messages
1
Im currently doing a project which has micro controller (Genie c14). for some reason when one pin is sent high, another pin is also outputting a 1.8v signal for no reason. Does anyone have any previous experience with this.
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
for no reason
There is a reason. It's a matter of finding which one. Why not start by telling us which pins are involved and what are your actions to set one pin high (the relevant lines of code) to check for possible side effects?
 
Top