DoubleDogDan
- Jul 20, 2014
- 24
- Joined
- Jul 20, 2014
- Messages
- 24
This is pretty basic & I'm guessing I know the answer, but I want to be sure. I'm repairing a PC PSU from a ~ 9 year old Dell. To take the cover off I had to disconnect (desolder) the 3 AC lines (hot/neutral/gnd) coming from the socket on the back of PSU where the line cord plugs in. I forgot to note which wire to the PSU circuit board goes to the hot side of the line. One side goes immediately into a fuse, and I'm guessing this is the hot side. Is this likely to be the case? I don't have a full schematic for the PSU, model # H875E-00..
TIA
Dan
TIA
Dan