Panasonic Panasync/Pro5G (model TX-D1752) what resistor "R612"?

[Simoc]

I've a Panasonic Panasync/Pro5G computer monitor. There is also a
marking "model: TX-D1752"

Well, there found a fried SMD resistor. Its resistance marking has
completely burnt away. Its numbering on the board is "R612" and it's
physically located on the solder side of the mainboard, near the rear
edge. Might anyone here have a schematic or a similar unit and bother
to look the resistance value of that resistor?

Thanks in advance.

 

[Mike Berger]

You might want to figure out why it burned before you replace it.

 

[me]

You might want to figure out why it burned before you replace it.

I've a Panasonic Panasync/Pro5G computer monitor. There is also a
marking "model: TX-D1752"

Well, there found a fried SMD resistor. Its resistance marking has
completely burnt away. Its numbering on the board is "R612" and it's
physically located on the solder side of the mainboard, near the rear
edge. Might anyone here have a schematic or a similar unit and bother
to look the resistance value of that resistor?

Thanks in advance.

pretty obvious to fidetermine why it burned, but he still will need the
value. If he does not know why it burned he will also have the value so he
can replace the next one.