Maker Pro
Maker Pro

Panasonic Genius Microwave

D

dx375

Jan 1, 1970
0
Just out of warranty 2.2 cubic foot Genius microwave just quit. (2+
years)
Pad and clock works, but when it powers on to cook. it makes a buzzing
noise about 5 seconds in and shuts off, no ding.
Made in China crap.....
I realize the magnetron has a 5 year warranty but it's the labor that
get you .....
Worth fixing?
Cheers Dave
 
T

Travis Jordan

Jan 1, 1970
0
dx375 said:
Worth fixing?

For < $150 delivered you can buy any number of good quality two cubic
foot microwave ovens. You'll pay that much just for a service call.

Welcome to the disposable society.
 
N

NSM

Jan 1, 1970
0
dx375 said:
Just out of warranty 2.2 cubic foot Genius microwave just quit. (2+
years)
Pad and clock works, but when it powers on to cook. it makes a buzzing
noise about 5 seconds in and shuts off, no ding.
Made in China crap.....
I realize the magnetron has a 5 year warranty but it's the labor that
get you .....
Worth fixing?
Cheers Dave

Mine died too. $2 MOV that blew it's guts out. It took out a heat sink
mounted component which I currently can't ID (it's sitting on the heatsink
besides the chopper and the Schottkys).

N
 
C

cnctut

Jan 1, 1970
0
dx375 said:
Just out of warranty 2.2 cubic foot Genius microwave just quit. (2+
years)
Pad and clock works, but when it powers on to cook. it makes a buzzing
noise about 5 seconds in and shuts off, no ding.
Made in China crap.....
I realize the magnetron has a 5 year warranty but it's the labor that
get you .....
Worth fixing?
Cheers Dave

I'm not a microwave fix it guy (but not for lack of effort)--but is the
magnetron cooling fan working--can you hear it running?--perhaps its
hungup, resulting in a thermal switch overheating and shutting down the
unit after 5 seconds of run time.
 
D

dx375

Jan 1, 1970
0
The oven went into the shop today for an estimate as there is still
some warranty left with the magnetron....parts only covered
Anything else will be parts and labor......
Good points tho....
 
T

Travis Jordan

Jan 1, 1970
0
dx375 said:
The oven went into the shop today for an estimate as there is still
some warranty left with the magnetron....parts only covered
Anything else will be parts and labor......

More than $150 I will wager.
 
C

cnctut

Jan 1, 1970
0
dx375-

Would be interested in hearing what the problem was?

Tut
 
D

dx375

Jan 1, 1970
0
Magnetron had a meltdown it seems, not worth fixing.....too
expensive...
Recommended to toss and purchase a new one...any recommendations in
the 2 cubic foot sizes?
 
T

Travis Jordan

Jan 1, 1970
0
dx375 said:
Magnetron had a meltdown it seems, not worth fixing.....too
expensive...

Inquiring minds want to know....was it more than $150 to repair?
 
N

NSM

Jan 1, 1970
0
Magnetron had a meltdown it seems, not worth fixing.....too
expensive...
Recommended to toss and purchase a new one...any recommendations in
the 2 cubic foot sizes?

Very happy with the Sharp Sensor 1200W

N
 
T

Travis Jordan

Jan 1, 1970
0
dx375 said:
yes....some other components were fried also.....

No surprise - nowadays on small appliances under $350 you are almost
always better off trashing them and buying a new one.

I hope they didn't charge you too much for the estimate.
 
C

cnctut

Jan 1, 1970
0
dx375--

Thanks for the update--sorry to hear your microwave died at the shop.
;-(

Tut
 
Top