Maker Pro
Maker Pro

Optical Linear Array Chip Identification - Old Scanner

J

Jurie Vorster

Jan 1, 1970
0
Dear Group,

Hacked from old scanners (Genius ColorPage and a Genius Hand Held) I have
two identical looking linear array optical sensors. I am sure the one is
B&W while the other full colour. There are no identification marks which I
can use to find out more about these chips. I would greatly appreciate it
if someone can point me towards or have any information such as pin layout,
interface logic, interface protocol etc. A circuit / schematic diagram
would ofcourse be the grand prize. All searches so far have been fruitless.
I would like to use these chips in my robot projects. Also have a image
sensor from an old Konica Q100 digital camera and would like information on
that.

Thanks,
Jurie Vorster.
 
J

Jurie Vorster

Jan 1, 1970
0
Absolutely perfect THANKS! Found the supplier's site and can get everything
I need from there. Also found some other site on the web with info... still
need to check them out but am sure to get good info.

Ciao,
Jurie.
 
Top