New Toy HP16500A, Need Help to use

[Ron]

Hello,

I just got a 16500A w/16532(1GSs Digitizing Scope) and 16550 (100Mhz
State-500Mhz Timing) analyzer off ebay and I'm trying to use it but I'm
having a little trouble. This equipment has so many bells and whistles I
need to dig though them all.

I have hooked up leads 0-1 on POD E1 to the in and out of a serial line
(using max232) and I'm trying to trigger on a keypress but I can't
figure out the trigger menu.
I set up a level 1 trigger on edge 1 (set to a 1) occurs once else no
state go to level 1.
I would expect the analyzer to sit and wait until a positive going edge
is seen then record, it isn't, it imediately records.

Anyone have one of these and can help me out I'd appreciate some help.

Ron

 

[Jim Flanagan]

Hello,

I just got a 16500A w/16532(1GSs Digitizing Scope) and 16550 (100Mhz
State-500Mhz Timing) analyzer off ebay and I'm trying to use it but I'm
having a little trouble. This equipment has so many bells and whistles I
need to dig though them all.

I have hooked up leads 0-1 on POD E1 to the in and out of a serial line
(using max232) and I'm trying to trigger on a keypress but I can't
figure out the trigger menu.
I set up a level 1 trigger on edge 1 (set to a 1) occurs once else no
state go to level 1.
I would expect the analyzer to sit and wait until a positive going edge
is seen then record, it isn't, it imediately records.

Anyone have one of these and can help me out I'd appreciate some help.

Ron

Ron -
You can find the technical manuals on the Agilent website.
http://www.home.agilent.com/agilent...=1000001217:epsg:pro&pageMode=MN&cc=US&lc=eng

This is the manual for the 'B' version, however.
Have fun
jim

 

[Ron]

Ron -
You can find the technical manuals on the Agilent website.
http://www.home.agilent.com/agilent...=1000001217:epsg:pro&pageMode=MN&cc=US&lc=eng


This is the manual for the 'B' version, however.
Have fun
jim

Thanks Jim, I already have all the manuals for my modules. I just can't
seem to make the trigger work properly.

Ron