Maker Pro
Maker Pro

Need some help to Identify a part please

P

prolater

Jan 1, 1970
0
Hi, is there anyone out there that can identify this part please or point me
in the direction to get more info, I am chasing the
pdf or specs on this device.
I have searched the net on a few occasions with no luck so any would be
great.
From what I can see it is a multiple LED module(approx 4 x 18) which I
assume maybe serially controlled via a Micro(uP), it has 6 pins for
connection.
I assume under the black blob is an IC I would imagine something serial
orientated or maybe even I2C due to the low Pin count.
Any help on a pdf or device part number or identification would be
appreciated.

Thanks for any help
Prolater


These links are to a couple of pics of the front and back.

http://i58.photobucket.com/albums/g271/prolater/front.jpg

http://i58.photobucket.com/albums/g271/prolater/Back.jpg
 
P

Pooh Bear

Jan 1, 1970
0
prolater said:
Hi, is there anyone out there that can identify this part please or point me
in the direction to get more info, I am chasing the
pdf or specs on this device.
I have searched the net on a few occasions with no luck so any would be
great.
From what I can see it is a multiple LED module(approx 4 x 18) which I
assume maybe serially controlled via a Micro(uP), it has 6 pins for
connection.
I assume under the black blob is an IC I would imagine something serial
orientated or maybe even I2C due to the low Pin count.
Any help on a pdf or device part number or identification would be
appreciated.

The black blob will indeed be covering an IC. A method used for low-cost high
quantity manufacture.

A Google suggests it's obsolete but available from stockists of obsolete parts.
http://www.google.com/search?hs=oMs&hl=en&lr=&client=opera&rls=en&q=cdm101+105-006&btnG=Search

Graham
 
Top