Maker Pro
Maker Pro

Need Help with Microwave Remote Control Prototype

I am currently in the beginning stages of creating the first microwave
remote control oven. My goal is to design a prototype by placing a
sensor in the microwave and designing a universal test remote to give
it commands. Be advised, you must know how to solder. If you are
willing to accept the challenge, please contact me at 562-622-1740, and
ask for Shawn. Thank you.
 
M

mkaras

Jan 1, 1970
0
I am currently in the beginning stages of creating the first microwave
remote control oven. My goal is to design a prototype by placing a
sensor in the microwave and designing a universal test remote to give
it commands. Be advised, you must know how to solder. If you are
willing to accept the challenge, please contact me at 562-622-1740, and
ask for Shawn. Thank you.

Very strange idea.

Microwave ovens require interlocks on the door for safety so the door
must be closed to permit oven activation. You have to be standing right
there in order to put your popcorn bag or steak in there in the first
place and then to close the door with the interlock. At this point your
right there so use the control panel on the oven to program its cycle
and get it started. Later when the cycle is done you have to go back to
the oven to get out the nuked contents. You open the door and if you
find you need more cook time your right there so once again close the
door and re-use the control panel. If at the end of any cycle the stuff
is hot take it out and your done. All activity has been done locally
and not remotely.

Oven - Handy; Remote Control - Useless;

- mkaras
 
L

Luhan

Jan 1, 1970
0
I am currently in the beginning stages of creating the first microwave
remote control oven. My goal is to design a prototype by placing a
sensor in the microwave and designing a universal test remote to give
it commands. Be advised, you must know how to solder. If you are
willing to accept the challenge, please contact me at 562-622-1740, and
ask for Shawn. Thank you.

I hereby nominate you for 'worst idea of the week'.

Luhan
 
I am currently in the beginning stages of creating the first microwave
remote control oven. My goal is to design a prototype by placing a
sensor in the microwave and designing a universal test remote to give
it commands. Be advised, you must know how to solder. If you are
willing to accept the challenge, please contact me at 562-622-1740, and
ask for Shawn. Thank you.

I am going to call you and kick your ass. Obviously this is for some
sort of prank.
 
L

linnix

Jan 1, 1970
0
I am going to call you and kick your ass. Obviously this is for some
sort of prank.

Why are you falling in his trap and annoy his enemy?
 
D

Donald

Jan 1, 1970
0
I am currently in the beginning stages of creating the first microwave
remote control oven. My goal is to design a prototype by placing a
sensor in the microwave and designing a universal test remote to give
it commands. Be advised, you must know how to solder. If you are
willing to accept the challenge, please contact me at 562-622-1740, and
ask for Shawn. Thank you.
Ask these people:

http://www.freepatentsonline.com/4816635.html
 
R

Rich Grise

Jan 1, 1970
0
I hereby nominate you for 'worst idea of the week'.

Nah - a microave oven with remote control over the internet. ;-)

Cheers!
Rich
 
R

Rich, but drunk

Jan 1, 1970
0
I am going to call you and kick your ass. Obviously this is for some
sort of prank.

562? I'm in that area code! Can I come watch you kick his ass? ;-)

Cheers!
Rich
 
S

Spajky

Jan 1, 1970
0
Nah - a microave oven with remote control over the internet. ;-)

.... that has been done few years ago in my country by some student
visiting a University for electronics & computers ... :)))
 
Top