Maker Pro
Maker Pro

My Video: Converting My CPU to Verilog Via Logisim Evolution (for Eventual FPGA Board?)

mcsoftware

Oct 13, 2015
26
Joined
Oct 13, 2015
Messages
26
Here's my latest video in my series about a CPU I designed. I implemented it in Logisim and then eventually Logisim Evolution, then VHDL. Now, the Verilog version (initial conversion by Evolution). Also shows a different fork of Evolution by Dr. Kevin Walsh that provides an automated process from design to FPGA board, and also Altera software and Notepad++.

 
Top