MT9M111 camera module

[Vitor de Andrade]

Hi everyone,

I'm starting a project with raspberry pi and this MT9M111. It's a CMOS camera module and it's seems to be widely used, but I just can't find any information other than the datasheet in the web.

My biggest trouble is getting the image data from the component, since it's output is paralel, but I would gratefully accept any information about how to use this module, how the comunication with the raspberry works and etc.

That's it, guys. Thank you in advance.

 

[(*steve*)]

I couldn't find anything for the rpi, but they're is arduino code for a custom shield using this camera.

It might be worth looking at that.

Google "mt9m111 arduino"

 

[Vitor de Andrade]

I couldn't find anything for the rpi, but they're is arduino code for a custom shield using this camera.

It might be worth looking at that.

Google "mt9m111 arduino"

Thanks, dude. It gives me something o begin, at least haha

Something weird is that the Arduino was not supposed to offer the clock required by the module(54MHz). That will result in a drop in the frame rate, I guess...

 

[Harald Kapp]

Here's a driver for the MT9M111 camera on a raspberry Pi.