Maker Pro
Maker Pro

Monitor, no green, but OSD shows green

Y

Yorker

Jan 1, 1970
0
I have a 19" flat screen Hyundai ImageQuest Q990 that's 6 months old. I
had to remove the VGA cable from the PC for a moment (To access a
awkward USB port), I noticed small sparks from the pins when putting it
back in. Now theres no green colour, which I verified using an on-line
monitor colour bars site. I checked the OSD menu and it shows all
colours fine. Realising it might be the Video Card I tried another one,
same, lastly I tried the monitor on another PC and the same. Any ideas
what could cause this and if its fixable easily?

Thanks for any reply
 
D

David

Jan 1, 1970
0
Probably broke off or bent the pin in the cable for the green.
Or the cable has an internal problem.
Beyond that the unit will need sent off to a factory service station or
servicer that is well equipped for monitor repair.

David
 
Top