Maker Pro
Maker Pro

MICRO USB

ajw911

Jul 29, 2017
1
Joined
Jul 29, 2017
Messages
1
Can anyone please tell me if there's an easy way to *manually* ground the ID pin via a switch?

I'm working on a project where I need to activate a device using this method - currently I've only been able to do this by hacking a micro-b plug & soldering a lead onto the ID pin. Is there a pre-made cable which has wires to all 5 pins?

Thanks
 

Electric-T

Jun 4, 2017
212
Joined
Jun 4, 2017
Messages
212
Find the ground wire. Find a suitable spst switch. Install the switch in between the lead coming off the pin and the actual ground.
 
Top