Maker Pro
Maker Pro

LCD TV Electronics Help

Anfo

May 11, 2017
3
Joined
May 11, 2017
Messages
3
Hello all

Not typically a forum I'd usually frequent but since I am interested in some electronics DIY repair I thought I would drop in to find out if I could obtain any assistance.

I have (had) a GVA branded LCD TV hanging in my computer workshop for a good while serving job information to me. At some point in the past however, I plugged a faulty ATX PSU into the same circuit as the TV and after a loudish pop (from the PSU), the TV was dead.

I have only recently disassembled the TV to find where power is plugged in and have discovered a circuit board as attached. Reading information on the board, there is mention of a "fuse" which has caught my attention. It needs to be said that even as a computer repairer I have the most rudimentary knowledge of electronics so I'm not sure what to look for and even if I have a chance to repair this problem.

So the question is, which component is the fuse? More information happily offered if required.

Thank you, Anfo.
 

Attachments

  • IMG_0077.JPG
    IMG_0077.JPG
    290.4 KB · Views: 44
  • IMG_0075.JPG
    IMG_0075.JPG
    273.5 KB · Views: 46
  • IMG_0076.JPG
    IMG_0076.JPG
    274.1 KB · Views: 95

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
So the question is, which component is the fuse? More information happily offered if required.

upload_2017-5-11_20-14-56.png


the fuse is circled in red and appears to be a 3.15A


Dave
 
Top