Maker Pro
Maker Pro

IRig UA schematic

Status
Not open for further replies.

FredF

Sep 16, 2014
30
Joined
Sep 16, 2014
Messages
30
5C3391C0-49C7-402C-AAE8-FED03AD8A925-2960-0000069172C2044F.jpeg
Hey Everyone,
Just wondering if anybody out there has a schematic for the iRig UA digital audio interface. It is the Android version of Amplitube's IOS powered guitar app. Found some for the IOS version, but not the Android version. Built one of those, which works on my iPhone, but not on any Android phone. I have no idea what changes would make it Android compatible. I provided the schematic for the IOS version as reference.
Any help would be greatly appreciated. Thanks.
Fred
 

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
If the audio is applied to the microphone input of an Android device then the schematic you post should achieve the same results - always assuming the software accepts the 'mic' input as the sampling source.

I don't know if there are differences between the sleeve connections on the jack plug (maybe the input and output are swapped??? dunno) but electrically the signals should be the same level as a 'standard' audio input signal so no differences there.
 

FredF

Sep 16, 2014
30
Joined
Sep 16, 2014
Messages
30
Thanks for the suggestion. I tried swapping the mic and ground. Same result. After more research it seems the Android version uses the USB cable for the input signal ( see attached pic). Not sure how that would be done. Gonna do more research. Any other thoughts or recommendations would be greatly appreciated.
 

Attachments

  • IMG_0284.JPG
    IMG_0284.JPG
    170.7 KB · Views: 177

Valhalla

Dec 6, 2020
1
Joined
Dec 6, 2020
Messages
1
Hi FredF...
...did you solve the problem?
Maybe such a cable (I don't know what connections it has :)
 

Attachments

  • 1.jpg
    1.jpg
    188.9 KB · Views: 3
Status
Not open for further replies.
Top