Maker Pro
Maker Pro

HP8012B Pulse Generator

KiwiSteve

Apr 11, 2014
28
Joined
Apr 11, 2014
Messages
28
Hello,

Does anyone have experience repairing an HP8012B pulse generator? I'm looking for some help fixing one.

Thanks,
Steve
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Do you have the service manual?
 

73's de Edd

Aug 21, 2015
3,613
Joined
Aug 21, 2015
Messages
3,613
Sir KiwiSteve . . . . .

Haven't used that one since the 90's . . . . .expound upon your problems being experienced with it.

Here is its DA--DA book:

Hoolet Plastered 8012 MANUAL
http://bama.edebris.com/manuals/hp/8012b/


73's de Edd
 
Last edited by a moderator:

KiwiSteve

Apr 11, 2014
28
Joined
Apr 11, 2014
Messages
28
Sir KiwiSteve . . . . .

Haven't used that one since the 90's . . . . .expound upon your problems being experienced with it.

Here is its DA--DA book:

Hoolet Plastered 8012 MANUAL
http://bama.edebris.com/manuals/hp/8012b/


73's de Edd

Thanks for the reply.

Basically, I purchased a "fully functional" unit on ebay that turned out to be DOA. On inspection there is a red wire and purple wire coming off the transformer at the rear of the unit. Both wires appear to have been cut, or possibly have become disconnected from some other place. I do have a manual and have looked at the schematics but haven't taken too much time to figure out the fault.

Steve
 
Top