Howdy the power to do?

[FuGuntje]

Hi, I am Fu Gung, evobiology student from Amobinia.
I about the transistor power gain read,
and want to amplify the AA cell power of 1.5 Ampere
and 3 Vold with the transistor gain so you
will help me drive cars with it.
The book has power gain for transistors very high, it says 100 000
and more for MOZFEDS.
My problem is that when so much power comes out of the transistor the wires of the transistors
are too thin for the currents.
To drive the automobile in my country you need 15 kWh it reads, and as much as 100 Vold
Now so much current cannot go through the transistor wires.
Or is it that the wires are so thing because the speed is higher, like
at very high speed no wires are needed at all?
Why are the transistor wires so thing, when 100000x power gain of my AA cell
will have so much current?
You will help me for the humanity .

 

[Rheilly Phoull]

Hi, I am Fu Gung, evobiology student from Amobinia.
I about the transistor power gain read,
and want to amplify the AA cell power of 1.5 Ampere
and 3 Vold with the transistor gain so you
will help me drive cars with it.
The book has power gain for transistors very high, it says 100 000
and more for MOZFEDS.
My problem is that when so much power comes out of the transistor the
wires of the transistors
are too thin for the currents.
To drive the automobile in my country you need 15 kWh it reads, and as
much as 100 Vold
Now so much current cannot go through the transistor wires.
Or is it that the wires are so thing because the speed is higher, like
at very high speed no wires are needed at all?
Why are the transistor wires so thing, when 100000x power gain of my AA
cell
will have so much current?
You will help me for the humanity .

You want to run a car on an AA cell ??

Rheilly P

 

[Eeyore]

Hi, I am Fu Gung, evobiology student from Amobinia.
I about the transistor power gain read,
and want to amplify the AA cell power of 1.5 Ampere
and 3 Vold with the transistor gain so you
will help me drive cars with it.

I suggest you do some physics and learn about energy.

Graham

 

[Vladimir Vassilevsky]

Hi, I am Fu Gung, evobiology student from Amobinia.
I about the transistor power gain read,

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Stupidents never tell that they are stupidents, and where they are from.
It would be something like "we almost accomplished the top rocket
science academy project, however my previous experience was with
super-nuclear physics, hence I need little direction".

and want to amplify the AA cell power of 1.5 Ampere
and 3 Vold with the transistor gain so you
will help me drive cars with it.

The stupidents usually don't know what they want to accomplish.
"I was told to do something about cars using a transistor"

The book has power gain for transistors very high, it says 100 000
and more for MOZFEDS.

The stupidents don't know what the book is. They can't read or write.

My problem is that when so much power comes out of the transistor the wires of the transistors
are too thin for the currents.

Stupidents never describe the problem in any detail. For this case, the
stupident would write: "I got 2N3904. My transistor is not working".

To drive the automobile in my country you need 15 kWh it reads, and as much as 100 Vold

Stupidents use "U" instead of "you". Stupidents don't use any
punctuation marks except "!".

Now so much current cannot go through the transistor wires.
Or is it that the wires are so thing because the speed is higher, like
at very high speed no wires are needed at all?
Why are the transistor wires so thing, when 100000x power gain of my AA cell
will have so much current?
You will help me for the humanity .

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The true stupident would conclude with something like "YOU MUST HELP ME
URGENTLY AT THE EARLIEST. YOUR HELP IS MUCH APPRECIATED"



Vladimir Vassilevsky
DSP and Mixed Signal Design Consultant
http://www.abvolt.com

 

[[email protected]]

Hi, I am Fu Gung, evobiology student from Amobinia.
I about the transistor power gain read,
and want to amplify the AA cell power of 1.5 Ampere
and 3 Vold with the transistor gain so you
will help me drive cars with it.
The book has power gain for transistors very high, it says 100 000
and more for MOZFEDS.
My problem is that when so much power comes out of the transistor the wires of the transistors
are too thin for the currents.
To drive the automobile in my country you need 15 kWh it reads, and as much as 100 Vold
Now so much current cannot go through the transistor wires.
Or is it that the wires are so thing because the speed is higher, like
at very high speed no wires are needed at all?
Why are the transistor wires so thing, when 100000x power gain of my AA cell
will have so much current?
You will help me for the humanity .

Unconvincing troll. And it has still pulled in four suckers so far.