Maker Pro
Maker Pro

How to setup trendnet bridge

mrel

Jul 2, 2008
115
Joined
Jul 2, 2008
Messages
115
Hello
Have trendnet bridge model Tew-640mb.buy from yard sale,Got problem the web site( web browser Http://tew-640mb.trendnet OR http:// 192.168.10.110) No longer exists.
Anyone know how to set the bridge up without the web browser?
Thank for help mrel
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Try this from the trendnet quick installation guide:
1. I typed http://tew-640mb.trendnet in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW-640MB's web configuration page?
1. Check your hardware settings again by following the instructions in section 2.
2. Make sure the Network Port and Wireless lights are lit.
3. Enter http://192.168.10.110 into the browser instead. This is the default IP address of the TEW-640MB. Make sure your network adapter’s TCP/IP settings are set to Obtain an IP address automatically (see the steps below).
4. Reset the TEW-640MB. Take a pin or paperclip and press the RESET button for 15 seconds, then let go. Wait 30 seconds, then type http://tew-640mb.trendnet or http://192.168.10.110 into your browser.
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Did you reset the device as explained unter 4.? The former user may have set other IP addresses.
 
Top