Maker Pro
Maker Pro

Help Locating Relay

stefon

Sep 9, 2011
2
Joined
Sep 9, 2011
Messages
2
Hello. I read the sticky at the top of the page and also googled this part to death and can't seem to find a supplier located in the US. I tried removing letters and numbers. Does anyone have any ideas? Thank you.

relayc.jpg
 

davelectronic

Dec 13, 2010
1,087
Joined
Dec 13, 2010
Messages
1,087
locate a relay

Hi there. Whats the relay configaration ? is it latching or not ? i am in the uk, ok miles away, but there might be something over here the same, it will give more ideas. Dave.
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
You're better off going to a site like digikey and searching for a similar device.

Here is the datasheet. (Yep, suppliers outside the US have valuable information too)

Armed with that you should have no problem finding something suitable.

There's plenty there. This one looks pretty good.
 

stefon

Sep 9, 2011
2
Joined
Sep 9, 2011
Messages
2
You're better off going to a site like digikey and searching for a similar device.

Here is the datasheet. (Yep, suppliers outside the US have valuable information too)

Armed with that you should have no problem finding something suitable.

There's plenty there. This one looks pretty good.

Thanks Steve, I ordered a couple to try them out.
 
Top