HC-05 in Bluetooth Speaker

Discussion in 'Radio and Wireless' started by _Nate_, Jun 8, 2018.

  1. _Nate_

    _Nate_

    Joined:
    Jun 12, 2017
    Messages:
    84
    Likes Received:
    0
    I've been attempting to make a bluetooth speaker, and right now I am having one main issue: what do I wire the pins of the HC-05 in relation to my amp board and R/L speakers. I also have a Bluetooth Audio Receiver coming in the mail but I would like to make do with my HC-05. Any help is appreciated.
     
    _Nate_, Jun 8, 2018
    #1
    1. Advertisements

  2. _Nate_

    kellys_eye

    Joined:
    Jun 25, 2010
    Messages:
    3,249
    Likes Received:
    855
    Location:
    West Coast, Scotland
    Nothing - the HC05 has no analogue input or output ports. You need the BT audio receiver to decode the BT signal (digital) and convert it to audio which you can THEN apply to the amplifier module.
     
    kellys_eye, Jun 8, 2018
    #2
    1. Advertisements

  3. _Nate_

    _Nate_

    Joined:
    Jun 12, 2017
    Messages:
    84
    Likes Received:
    0
    That's odd. I was looking at this instructable and they don't seem to use anything like that.
    Edit: Also to be noted the bluetooth audio receiver has a built-in amp.
     
    Last edited: Jun 8, 2018
    _Nate_, Jun 8, 2018
    #3
  4. _Nate_

    kellys_eye

    Joined:
    Jun 25, 2010
    Messages:
    3,249
    Likes Received:
    855
    Location:
    West Coast, Scotland
    The article shows the Bluetooth module to be a 'stereo bluetooth' device - the HC-05 isn't such a beast.
     
    kellys_eye, Jun 8, 2018
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.