Maker Pro
Maker Pro

Garage door opener - malfunctional safety sensor

J

John Smith

Jan 1, 1970
0
We have a residental Lift-Master Garage Door Opener. Recently, the light of
the right sensor did not turn on after a severe thunderstorm (the left one
was all right) and the door could not be lowered. I replaced both sensors
with new ones from Lift-Master, and the light of the right sensor still did
not turn on (the left one was all right). What might be the problem? Any
suggestions? Thanks.
 
J

Jerry G.

Jan 1, 1970
0
Check to see if there is any voltage going to the light. If not, trace it
back. Maybe the power supply, or some other component that drives it, has
failed.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


We have a residental Lift-Master Garage Door Opener. Recently, the light of
the right sensor did not turn on after a severe thunderstorm (the left one
was all right) and the door could not be lowered. I replaced both sensors
with new ones from Lift-Master, and the light of the right sensor still did
not turn on (the left one was all right). What might be the problem? Any
suggestions? Thanks.
 
Top