Emerson VCR755 Channel Setup

[kartdriver88]

This machine may not be worth it but I have an Emerson VCR755 I use as
tuner on a TV with a bad internal tuner. It's a setup basically for m
son's gaming but occasionally it's used to record events, but channel
37 through 94 are missing in the sequence. I don't have the remote o
the user guide- is there a way to reset the channels without a remote
What remote beside the original works best

 

[sofie]

This is NOT a remote control or channel programming issue......
.... those channels you mentioned are NOT AVAILABLE on this vintage (1989)
VCR.

 

[kartdriver88]

This is NOT a remote control or channel programming issue......
.... those channels you mentioned are NOT AVAILABLE on this vintag
(1989)
VCR.
--
Best Regards,
Daniel Sofie
Electronics Supply & Repair
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -



"kartdriver88" [email protected] wrot
in
message
This machine may not be worth it but I have an Emerson VCR755 I use a
a
tuner on a TV with a bad internal tuner. It's a setup basically fo
my
son's gaming but occasionally it's used to record events, bu
channels
37 through 94 are missing in the sequence. I don't have the remote or
the user guide- is there a way to reset the channels without
remote?
What remote beside the original works best?

37, etc. were NEVER included in this VCR's programming BUT I can ge
Ch. 95 and so on? Maybe I'm being dense but someone will have t
explain this "explanation" to me.......please......

 

[[email protected]]

kartdriver88:
CATV channel 95 is just above the broadcast FM band and is actually
lower in frequency than CATV channel 14. The Emerson VCR755 was
marketed when the CATV channels were not entirely recoginized above
channel 36. During this period of time, the lowest frequency CATV
channels 95 -100 were available, but nothing widely available between
36 and 95 yet. Most cable systems have dropped those lowest frequency
channels because of interference with broadcast FM.
electricitym
..
..